Education
2014-2017 Master of Biomedical Engineering
Location: Iran University of Science and Technology, Tehran, Iran
Thesis Topic: Design and simulation of a microfluidic device for droplet generation applications
Thesis Grade: 19.75/20
Supervisor: Dr. Sasan Asiaei
GPA: 3.81/4
2010-2014 Bachelor of Mechanical Engineering
Location: Islamic Azad University Central Branch, Tehran, Iran
Thesis Topic: Reverse engineering of hand brake cable for Peugeot 206
Thesis Grade: 18/20
Supervisor: Dr. Jahanbakhsh Hamedi
GPA: 3.3/4
Selected Courses
- Thermodynamics I: 19/20
- Dynamics of machinery: 17/20
- Microfluidics in Biomechanics: 20/20
- Finite Element Methods in Biomechanics: 17.50/20
- Finite Element Methods II: 16.50/20
- Fluid Mechanics in BME: 16.60/20
- Bioinstrumentation: 17.10/20
Research Interests
- Lab-on-a-Disc
- Cell Engineering
- Drug Delivery
- BioMEMS
- Microfluidics
-
Lab-on-a-Chip
-
Nanotechnology
- Fluid Mechanics
- Microfabrication
Publications
-
Mohammadreza Chimerad, Esmail Pishbin, Sasan Asiaei, Fatemeh Ghorbani Bidkorpeh, and Manochehr Eghba; "The Effect of Geometrical and Fluid Kinematic Parameters of a
Microfluidic Platform on the Droplet Generation." In 24th National and 2nd International Iranian Conference on Biomedical Engineering (ICBME), pp. 1-6. IEEE, 2017.
- Esamil Pishbin, Mohammadreza Chimerad, Sasan Asiaie, Mahdi Navidbakhsh, Amin Kazemzade, Aman Rossum, On Disk Generation of Gas-liquid segmented
Flow, lab on a chip Journal, (Submitted)
-
Mohammadreza Chimerad, Sasan Asiaie, Fatemeh Ghorbani Bidkorpeh, Empirical investigation the effect of geometrical and fluid kinematic parameters on droplet diameter based on
microfluidic devices, Modares Mechanical engineering Journal, (Submitted)
- Hamed Bagheri, Mahdi Sajjadi, Mohammadreza Chimerad, Mohsen Esfanjoo, Empirical investigation of noise reduction filter for a flow-based
spirometer accuracy improvement, the 6th RSI international conference on Robotic & Mechanics, (Submitted)
- Droplet Microfluidics in Tubes, Geometric and Surface Considerations in differenet regimes, Modeling and Experimental Verifications for single sell analysis
(Under Preparation)
Seminars
-
Mohammadreza Chimerad, Esmail Pishbini, Sasan Asiaei; Fatemeh Ghorbani B., Manouchehr Eghbal, “The effect of geometrical and fluid kinematic parameters of microfluidic
platform on droplet generation”, 24th National and 2nd International Iranian Conference on Biomedical Engineer, 30 November-2 December 2017, Tehran, Iran
- Voluntary participant in 21st National Iranian Conference on Biomedical Engineer ", 26-28 December 2014, Tehran, Iran
Certifications
- Catia Advance, Apr 2018, 48 Hours, Iran Catia Society
- Geometrical Dimensioning and Tolerancing (GD&T), Dec 2017, 40 Hours, Supplying APCO
- AutoCAD (2D), Nov 2017, 30 Hours, Research Training Center of Tehran University
- Catia Advance, Aug 2017, 30 Hours, Iran Catia Society
Work Experience
-
Position: Research Assistant
Description: Literature surveys on Lab-on-a-Disc (Applications, Governing equations), Disc fabrication, Design and fabrication disc platform devices for curing and diagnosis
applications
Location: microfluidic Lab, Iranian Research Organization for Science and Technology, Year: 2017-2018
-
Position: Mechanical Engineer
Description: Reverse engineering of automotive parts, 2D and 3D modeling, Design planning system for the maintenance & repairing unit, Design an inventory control
system
Location: M&R unit, Kimiya Motor, Year: 2015-present
Teaching Experience
-
Position: Teacher Assistant, Course: Dynamic of Machinery, Location: Tehran, Iran, Year: 2016
-
Position: Tutor, Course: Mathematic, Location: Tehran, Iran, Year: 2010-present
Laboratory Experience
- Biomechanics Laboratory, Faculty of Mechanical Engineering, Iran University of Science and Technology Determination the effect of fluid properties and geometrical features on the diameter of
droplets generated via flow-focusing microfluidic chip. Work with: Syringe Pump, Digital Microscope
- Drug delivery Lab, School of pharmacy, Shahid Beheshti University of medical science Setup a passive microfluidic device that generates monodispersed droplets for drug delivery
applications.
Work with: Syringe Pump, Inverted Microscope
- Microfluidics Lab, Electricity and Information technology department, Iranian Research Organization for Science and Technology Design and fabrication a disc platform device for monodispersed
droplets generation via disc rotation equipment. Work with: Computer Numerical Control (CNC), Cutter Plotter, CD Imager
Honors and Awards
- 4 Scholarships for attending Automotive Industry courses, Kimiyamotor, Iran, 2017
- Ranked 4th among M.Sc. students, based on overall GPA, among the 20 students of Biomedical Engineering, University of Science and Technology, Iran, 2014-2017
- Ranked Top 3 % among approximately 400,000 participants in the National Entrance Examination form Iranian universities, Iran, 2010
Selected Projects
- Design a v-shaped microchannel on a compact disc-shaped microfluidic device for droplet generation
the aim of the project was to design a V-shaped microchannel in which Oil liquid from the main channel pumped by centrifugal forces. By changing the direction of the microchannel the droplets
were generated by the dominance of the body forces over surface forces. It was done during internship at Microfluidic Lab of Iranian Research Organization for Science and Technology.
Supervisor: Dr.Pishbin
- Construct a syringe pump device for laboratory applications
Design and construction a device pumping the fluids with pre-defined time variable functions for Biomedical Instrumentation course project.
Supervisor: Dr.Beigzade
- Design a flow-focusing geometry on a chip-based microfluidic device in order
to generate droplets
The aim of the project was to assess the effect of physical and geometrical parameters on generated droplets.
Supervisor: Dr.Asiaie
- Construct a Spirometry device for asthma diagnosis
Design and construction the Spirometry device for the sake of measuring the volume of air inspired and expired by the lungs with the capability to display the range of variation.
Supervisor: Mr.Bagheri
- Construct a Calibration device for Spirometry devices
Design and construction the calibration device for spirometry devices according to the determined standards.
Supervisor: Mr.Bagheri
Skills
-
Technical Skills
Writing: Endnote, Latex (Basic)
Programming Languages: Basic Knowledge of MatLab
Applied Software: AutoCAD, SolidWorks, Catia Fluent
Public Softwre: Microsoft Office (Word, Excel, PowerPoint)
-
Social Skills
Energetic and Hard working
Good Team work and Communication skill
Experienced at giving presentations to large audience
-
Languages
English: EAP- Persian council Institute for 3 years
References
-
Dr. S. Asiaei
Iran University of Science and Technology, Tehran, Iran.
asiaei@iust.ac.ir
-
Dr. F. Ghorbani Bidkorpeh
Shahid Beheshti of Medical Science, Arak, Iran.
f.ghorbani@sbmu.ac.ir
-
Dr. M. Eghbal
Iranian Research Organization for Science and Technology, Tehran, Iran.
eghbal-m@yahoo.com